Product Products
Product name:


Listing date: 2017-06-04

Before painting the aircraft, if there is oil or other residues on the surface of the aircraft, will not only affect the appearance, but also affect the quality of the paint, and it is easy to cause bubbling, cracking, shedding as a result. During the maintenance of the aircraft, if there leaves residual oil, lubricants, dust, imprinting and other dirt on the surface of the structural parts, it will affect the bond between the structural components and reduce the adhesion between the structure, thus affecting the structure safety. The BD600 multipurpose safety solvent has excellent cleaning and degreasing properties for pre-painted metal surfaces, effectively activating and cleaning epoxy and polyurethane primers without corroding metals and light metals.

Product usage

The product is used for cleaning and degreasing metal surfaces of the aircraft, effectively activate and clean epoxy and polyurethane primers. Such as spray gun cleaning in the spray rinsing workshop.

Product advantages

★ The only metal surface cleaning products through the airworthiness verification of domestic aircraft ; 

★ High security: no teratogenic or carcinogens, toluene, glycol ether substances;

★ Very high dissolving capacity;

★Excellent cleaning and degreasing performance to the mental surface before coating cleansing, effective activation and cleaning of the epoxy polyurethane primer, non-corrosive metal;

★ low odor.

Technical specifications

D6-17487 P, BAC5750K

The airworthiness approval number


Replacement parts number


Usage method

Spray, brush or scrub

Technical characteristics

▪ Appearance:  transparent liquid

▪ Density : (21 ° C) 0.89

▪ Flash point:  (ISO2592) 30 ° C

▪ Evaporation rate:  (NFT30301) 0.6

▪ Halogenated hydrocarbons: No

Storage and operating safety instructions

1. Due to degreasing effecton on the skin, appropriate gloves need to be worn in the operation of the BD600 multipurpose safety solvent. Avoid inhalation or swallowing the product.

2. Wear protective glasses when operating. If the eyes and skin contact with this product, immediately rinse with water. If it is continuous operation, it is recommended to set the exhaust device at the operation.

3. The BD600 multipurpose safety solvent must be used and stored at the location remote from the source of ignition and heat.

The product needs to be stored in the original barrel. For further information, please refer to MSDS.

The manufacturer

Manufacturer: Beijing Yadirit Aviation Chemical Products Co.Ltd

Address: Industrial Technology Development Zone, Miyun County, Beijing

Sales Department Tel: 010-89099818

Technical Department Tel: 010-69048047


China · Beijing Yadi Li special aviation new materials company

Address : Beijing Economic and Technological Development Zone
Phone : 010-89099818
Fax : 010-89099818
WeCha t
Copyright @2005 - 2016 China Beijing Yadi Li special aviation new materials company