Product Products
Product name:

YD-601 stripper

Listing date: 2017-06-13

After six years of operation, the airplane needs to be faded and re-sprayed on the surface. Our company’s YD-601 stripper is water-based, neutral environment-friendly product, replacing the acidic or alkaline stripper products, completely solve the corrosion problems of aircraft materials, including metal and non-metallic materials; can effectively fade off high solid epoxy resin paint layer and high solid polyurethane paint on the surface of the aircraft, greatly reduce maintenance time in repair work. Besides, it has a strong adhesion, so that can also be attached to retain for a long time even in the vertical surface of the aircraft so as to accelerate the speed of fade paint and improve the efficiency.

Product usage

Can effectively peel off epoxy,  epoxy primer, polyurethane and similar coatings.

The product advantages

★The only aircraft stripper products that through the domestic airworthiness verification;

★ Access to invention patents;

★ Low odor, thixotropic paint;

★ Effectively strip epoxy, epoxy primer, polyurethane and similar coating;

★Does not contain dichloromethane, phenols, chromates, ammonia or amines, environmentally friendly.

Technical specifications

Boeing D6-17487 P

The airworthiness approval number

HH0085-AAD

Replace parts number

PR5044, Turco6776

Usage method

Peel off the uniform coating on the surface in a non-atomizing mist spray way. If it is necessary to repeat the operation, you can set aside enough time for it to take effect, its performance increases with the temperature.

Clear: Remove the peeled paint layer with a scraper, and then rinse with high pressure water. 

Caution: The product is mainly used for the removal of metal surface coating, can not be used to fade the paint layer on the surface of magnesium alloy and composite.

Disposal information

Waste and residual paints should be disposed of in accordance with local and regional regulations. For other disposal information, please refer to the Material Safety Data Sheet.

Concentrate:

(1) If possible, recycling or recycling.

(2) For a small amount of residue, can be dissolved in water, if meet the local requirements, then the sewage can be discharged into the groundwater pipeline.

Waste solution rinse: Go through (1) or (2) treatment or adjust the pH to 9.5-10.5 so that make the heavy metal precipitate (if present); the aqueous solution that after separating needs to adjust its pH value of 7.0-8.0 and then could be discharged into the sewer line.

Storage and operating safety instructions

• Avoid contact with eyes, skin and clothing. Please use goggles, gas masks and gloves when using.

• Do not spray in a confined environment.

• Keep well-ventilated.

• Store at 2-40 ° C.

Manufacturers information

Manufacturer: Beijing Yadirit Aviation Chemical Products Co., Ltd

Address: North Chengjiazhuang Village, Shilibao Town, Miyun County, Beijing

Sales Department Tel: 010-89099818

Technical Department Tel: 010-69048047

 

China · Beijing Yadi Li special aviation new materials company

Address : Beijing Economic and Technological Development Zone
Phone : 010-89099818
Fax : 010-89099818
WeCha t
Phone
Copyright @2005 - 2016 China Beijing Yadi Li special aviation new materials company
犀牛云提供企业云服务